Numerical model for geothermal energy utilization from double pipe heat exchanger in abandoned oil wells

Abstract

The number of abandonded wells are increasing in the late period of oilfield development. The utilization of these abandonded oil wells is promising and environment-friendly for geothermal development. In this study, a numerical model for geothermal heating is derived from a double pipe heat exchanger in abandoned oil wells. The main influencing factors of injection rate, injection time, and the types of filler in casing annulus on temperature profiles and outlet temperature have been considered in this model. The influences of injection rate on heat-mining rate are then discussed. Results show that the double pipe heat exchanger can gain higher temperature at the outlet when the casing annulus is filled by liquid other than dry cement under the given parameter combination. The outlet temperature decreases with the increase in injection rate and injection time. The temperature rapidly decreases in the first 40 days during the injection process. The balance between heat mining rate and outlet temperature is important for evaluating a double pipe heat exchanger in abandoned oil wells. This work may provide a useful tool for a field engineer to estimate the temperature of liquid in wellhead and evaluate the heat transfer efficiency for double pipe heat exchanger in abandoned oil wells.

Cited as: Lin, Z., Liu, K., Liu, J., Geng, D., Ren, K., Zheng, Z. Numerical model for geothermal energy utilization from double pipe heat exchanger in abandoned oil wells. Advances in Geo-Energy Research, 2021, 5(2): 212-221, doi: 10.46690/ager.2021.02.10

References

Bennett, K. Power generation potential from coproduced fluids in the Los Angeles Basin. California, Stanford University, 2012.

Carslaw, H. S., Jaeger, J. C. Conduction of Heat in Solids (2nd ed). Oxford, UK, Clarendon Press, 1959.

Cheng, W.-L., Huang, Y.-H., Lu, D.-T., et al. A novel analytical transient heat-conduction time function for heat transfer in steam injection wells considering the wellbore heat capacity. Energy, 2011, 36(7): 4080-4088.

Chen, S., Ding, B., Gong, L., et al. Comparison of multi-field coupling numerical simulation in hot dry rock thermal exploitation of enhanced geothermal systems. Advances in Geo-Energy Research, 2019, 3(4): 396-409.

Chiu, K., Thakur, S. C. Modeling of wellbore heat losses in directional wells under changing injection conditions. Paper SPE 22870 Presented at SPE Annual Technical Conference and Exhibition, Dallas, Texas, 6-9 October, 1991.

Cui, G., Ren, S., Zhang, L., et al. Geothermal exploitation from hot dry rocks via recycling heat transmission fluid in a horizontal well. Energy, 2017, 128: 366-377.

Eickmeier, J. R., Ersoy, D., Ramey, H. J. Wellbore temperatures and heat losses during production or injection operations. Journal of Canadian Petroleum Technology, 1970, 9(2): 115-121.

Erdlac, R. J., Armour, L., Lee, R., et al. Ongoing resource assessment of geothermal energy from sedimentary basins in Texas. Paper SGP-TR-183 Presented at Thirty-Second Workshop on Geothermal Reservoir Engineering, Stanford, California, 22-27 January, 2007.

Galvao, M. S. C., Carvalho, M. S., Barreto, Jr. A. B. A coupled transient wellbore/reservoir-temperature analytical model. SPE Journal, 2019, 24(5): 2335-2361.

Hasan, A. R., Kabir, C. S. Heat transfer during two-phase flow in wellbores; Part I–Formation temperature. Paper SPE 22866 Present at SPE Annual Technical Conference and Exhibition, Dallas, Texas, 6-9 October, 1991.

Hasan, A. R., Kabir, C. S. Aspects of wellbore heat transfer during two-phase flow (includes associated papers 30226 and 30970). SPE Production & Facilities, 1994a, 9(3): 211-216.

Hasan, A. R., Kabir, C. S. Determination of static reservoir temperature from transient data following mud circulation. SPE Drilling & Completion, 1994b, 9(1): 17-24.

Hasan, A. R., Kabir, C. S., Lin, D. Analytic wellbore temperature model for transient gas-well testing. Paper SPE 84288 Presented at SPE Annual Technical Conference and Exhibition, Denver, Colorado, 5-8 October, 2003.

Hasan, A. R., Kabir, C. S., Lin, D. Analytic wellbore temperature model for transient gas-well testing. SPE Reservoir Evaluation & Engineering, 2005, 8(3): 240-247.

Hasan, A. R., Kabir, C. S., Wang, X. Wellbore two-phase flow and heat transfer during transient testing. SPE Journal, 1998, 3(2): 174-180.

Holman, J. P. Heat Transfer (10th ed). Dubuque, USA, McGraw-Hill Book Company, 2009.

Li, K., Sun, W. Modified method for estimating geothermal resources in oil and gas reservoirs. Mathematical Geosciences, 2015, 47(1): 105-117.

Nian, Y.-L., Cheng, W.-L. Evaluation of geothermal heating from abandoned oil wells. Energy, 2018, 142: 592-607.

Ramey, Jr. H. J. Wellbore heat transmission. Journal of Petroleum Technology, 1962, 14(4): 427-435.

Song, G., Song, X., Li, G. An integrated multi-objective optimization method to improve the performance of multilateral-well geothermal system. Renewable Energy, 2021, 172: 1233-1249.

Sui, D., Wiktorski, E., Røksland, M., at al. Review and investigations on geothermal energy extraction from abandoned petroleum wells. Journal of Petroleum Exploration and Production Technology, 2019, 9(2): 1135-1147.

Van Everdingen, A., Hurst, W. The application of the Laplace transformation to flow problems in reservoirs. Journal of Petroleum Technology, 1949, 1(12): 305-324.

Wang, K., Yuan, B., Ji, G., et al. A comprehensive review of geothermal energy extraction and utilization in oilfields. Journal of Petroleum Science and Engineering, 2018, 168: 465-477.

Wang, S., Yan, J., Li, F., et al. Exploitation and utilization of oilfield geothermal resources in China. Energies, 2016, 9(10): 798.