3D displacement discontinuity analysis of in-situ stress perturbation near a weak fault

Abstract

A numerical investigation utilizing the 3D displacement discontinuity method is performed to examine the stress perturbations and induced displacements near a weak fault with arbitrary orientations and dip, assuming zero shear stress and normal displacement. The in-situ stress field near the fault is taken as known and varied with depth. The modelling is constructed based on indirect boundary integral equations. In this work, the fault plane is first modelled as a rectangular plane with negligible thickness between the adjacent surfaces. The fault plane is then divided into numerous rectangular boundary elements with imposed shear singularities on the surface, which is normal to the fault plane to simulate a traction-free scenario. The numerical results of the total induced stresses and displacements are then compared to the existing solutions of a penny-shaped crack for validation purpose. With validated results, the paper moves on to the discussion of various factors that have impacts on the induced stress and displacements, including: aspect ratio which is defined by strike over dip; orientation of the strike on the horizontal ground surface; as well as dip. The boundary integration method with modification is also used to model an elliptical distribution of singularities with inner, corner, and edge elements to accommodate more complex shape of a discontinuity; small differences are observed.

Cited as: Chai, Y., Yin, S. 3D displacement discontinuity analysis of in-situ stress perturbation near a weak fault. Advances in Geo-Energy Research, 2021, 5(3): 286-296, doi: 10.46690/ager.2021.03.05

References

Anderson, E. M. The Dynamics of Faulting and Dike Formation with Application to Britain. Edinburge, United Kingdom, Oliver and Boyd, 1951.

Anyim, K., Gan, Q. Fault zone exploitation in geothermal reservoirs: Production optimization, permeability evolution and induced seismicity. Advances in Geo-Energy Research, 2020, 4(1): 1-12.

Bagge, M., Hampel, A. Three-dimensional finite-element modelling of coseismic Coulomb stress changes on intracontinental dip-slip faults. Tectonophysics, 2016, 684: 52-62.

Beer, G., Poulsen, B. Efficient numerical modelling of faulted rock using the boundary element method. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1994, 31(5): 485-506.

Bletery, Q., Thomas, A., Rempel, A., et al. Imaging shear strength along subduction faults. Geophysical Research Letter, 2017, 44: 11329-11339.

Brady, B. Boundary element methods for mine design. London, University of London, 1979.

Brady, B., Bray, J. The boundary element method for elastic analysis of tabular orebody extraction. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1978, 15(1): 29-37.

Cooke, M. Fracture localization along faults with spatially varying friction. Journal of Geophysical Research: Solid Earth, 1997, 102(B10): 22425-22434.

Corkum, A., Damjanac, B., Lam, T. Variation of horizontal in situ stress with depth for long-term performance evaluation of the Deep Geological Repository project access shaft. International Journal of Rock Mechanics and Mining Sciences, 2018, 107: 75-85.

Crouch, S., Starfield, A. Boundary Element Methods in Solid Mechanics. London, United Kingdom, George Allen & Unwin, 1983.

Dusseault, M., Bruno, M., Barrera, J. Casing shear: Causes, cases, cures. Paper SPE 48864 Presented at SPE International Oil and Gas Conference and Exhibition, Beijing, China, 2-6 November, 1998.

Faraji, M., Rezagholilou, A., Ghanavati, M., et al. Breakouts derived from image logs aid the estimation of maximum horizontal stress: A case study from Perth Basin, Western Australia. Advances in Geo-Energy Research, 2021, 5(1): 8-24.

Fotoohi, K., Mitri, H. Non-linear fault behaviour near underground excavations-A boundary element approach. International Journal for Numerical and Analytical Methods in Geomechanics, 1996, 20(3): 173-190.

Fulton, P., Saffer, D., Bekins, B. A critical evaluation of crustal dehydration as the cause of an overpressured and weak San Andreas Fault. Earth and Planetary Science Letters, 2009, 284(3-4): 447-454.

Gao, F., Kang, H., Li, J. Numerical simulation of fault-slip rock bursts using the distinct element method. Tunnelling and Underground Space Technology, 2021, 110: 103805.

Haimson, B., Lee, C. Hydrofracturing stress determinations at Darlington, Ontario. Canadian Rock Mechanics Symposium (Proceedings), Toronto, Ontario, Canadian Institute of Mining and Metallurgy, 1980, 22: 42-50.

Hawkes, C., McLellan, P. A new model for predicting time-dependent failure of shales: Theory and application. Journal of Canadian Petroleum Technology, 1999, 38(12): 49-55.

Hazeghian, M., Soroush, A. Numerical modeling of dip-slip faulting through granular soils using DEM. Soil Dynamics and Earthquake Engineering, 2017, 97: 155-171.

Henk, A. Stress and strain during fault-controlled lithospheric extension-insights from numerical experiments. Tectonophysics, 2006, 415(1-4): 39-55.

Homberg, C., Hu, J., Angelier, J., et al. Characterization of stress perturbations near major fault zones: Insights from 2-D distinct-element numerical modelling and field studies (Jura mountains). Journal of Structural Geology, 1997, 19(5): 703-718.

Jaeger, J., Cook, N. G. Fundamentals of Rock Mechanics. Oxford, United Kingdom, Wily-Blackwell, 1969.

Kaiser, P. K., Maloney, S. M., Yong, S. Role of large scale heterogeneities on in-situ stress and induced stress fields. Paper Arma 16-571 Presented at 50th US Rock Mech/Geomechanics Symposium, Houston, Texas, USA, 26-29 June, 2016.

Kruszewski, M., Hofmann, H., Alvarez, F., et al. Integrated Stress Field Estimation and Implications for Enhanced Geothermal System Development in Acoculco, Mexico. Geothermics, 2021, 89: 101931.

Kuwahara, Y., Choi, J., Cheon, Y., et al. Dependence of earthquake faulting type on fault strike across the Korean Peninsula: Evidence for weak faults and comparison with the Japanese Archipelago. Tectonophysics, 2021, 804: 228757.

Lama, R., Vutukuri, V. Handbook on Mechanical Properties of Rocks: Testing Techniques and Results (Vol. 2). Clausthal-zellerfiel, Germany, Trans Tech Publications, 1978.

Li, K. Numerical analysis of undersea geostress field around fault. Electronic Journal of Geotechnical Engineering, 2015, 20(5): 1887-1896.

Li, L., Aubertin, M., Simon, R. Maximum and minimum horizontal stress evaluation based on the geometry of a single borehole breakout. Paper ARMA-2000-0865 Presented at the 4th North American Rock Mechanics Symposium, Seattle, Washington, USA, 31 July-3 August, 2000.

Lobatskaya, R., Strelchenko, I., Dolgikh, E. Finite-element 3D modeling of stress patterns around a dipping fault. Geoscience Frontiers, 2018, 9(5): 1555-1563.

Mandl, G. Discontinuous fault zones. Journal of Structural Geology, 1987, 9(1): 105-110.

Pollard, D. D., Segall, P. Theoretical displacement and stresses near fractures in rocks: With application to faults, points, veins, dikes, and solution surfaces, in Fracture Mechanics of Rocks, edited by B. Atkinson, London, United Kingdom, Academic Press, pp. 277-349, 1987.

Ramos, C. C., Daros, C. Stacking sequence optimization of laminated plate structures using the boundary element method. Engineering Analysis with Boundary Elements, 2021, 127: 113-127.

Ritz, E., Mutlu, O., Pollard, D. D. Integrating complementarity into the 2D displacement discontinuity boundary element method to model faults and fractures with frictional contact properties. Computers & Geosciences, 2012, 45: 304-312.

Rybicki, K. R. Shear stress on a vertical strike-slip fault in a layered medium due to tectonic loading: San Andreas Fault system. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1995, 32(4): A152.

Segall, P., Pollard, D. D. Mechanics of discontinuous faults. Journal of Geophysical Research: Atmospheres, 1980, 85(B8): 4337-4350.

Shen, B., Shi, J. A numerical scheme of coupling of fluid flow with three-dimensional fracture propagation. Engineering Analysis with Boundary Elements, 2019, 106: 243-251.

Shi, H., Huang, F., Ma, Z., et al. Mechanical mechanism of fault dislocation based on in situ stress state. Frontiers in Earth Science, 2020, 8: 52.

Streit, J. E. Low frictional strength of upper crustal faults: A model. Journal of Geophysical Research: Solid Earth, 1997, 102(B11): 24619-24626.

Wang, Y., Mi, Q. In-situ stress perturbations and determinations near a fault and their impacts on hydraulic fracturing design. Paper SPE 181779 Presented at SPE Asia Pacific Hydraulic Fracturing Conference, Beijing, China, 24-26 August, 2016.

Wu, K., Olson, J. E. A simplified three-dimensional displacement discontinuity method for multiple fracture simulations. International Journal of Fracture, 2015, 193: 191-204.

Yin, S., Rothenburg, L., Dusseault, M. B. 3D coupled displacement discontinuity method and finite element analysis of reservoir behavior during production in semi-infinite domain. Transport in Porous Media, 2006, 65: 425-441.

Zalohar, J., Vicic, B., Potocnik. M., et al. Precursory stress changes before large earthquakes; on a new physical law for earthquakes. Journal of Structural Geology, 2020, 141: 104208.

Zhang, S., Yin, S. Determination of horizontal in-situ stresses and natural fracture properties from wellbore deformation. International Journal of Oil, Gas and Coal Technology, 2014, 7(1): 1-28.

Zhao, K., Gu, S., Yan, Y., et al. A simple and accurate interpretation method of in situ stress measurement based on rock Kaiser effect and its application. Geofluids, 2018, 2018: 9463439.