Optical characterization of full-field deformation and damage evolution in hot dry rock under mechanical loading
Abstract
Geothermal energy continues to emerge as a reliable, low-carbon resource with strong potential to support long-term clean energy goals. However, the development of enhanced geothermal systems is often limited by incomplete understanding of fracture initiation, propagation, and associated damage evolution within hot dry rock. Accurately charac terizing these processes is essential for predicting stimulation outcomes and ensuring reservoir stability. This study employs high-resolution three-dimensional digital image correlation (DIC) to quantify strain localization and damage progression in hot dry rock samples collected from the Department of Energy Utah FORGE project’s Well 16B (78) 32. Laboratory tests conducted under uniaxial compression and Brazilian tensile loading provide a controlled framework for observing mechanical responses under contrasting stress regimes. The DIC-based analysis identifies four distinct deformation stages: Initial closure, linear elastic response, elastic-plastic transition, and a final plastic phase associated with unstable fracture growth. Across both loading conditions, deformation is governed by tensile-dominated strain fields, with fractures consistently initiating and propagating along the specimen centerline. Damage variables derived from strain statistics range from approximately 0.25±10% in Brazilian tensile tests to 0.30±20% in uniaxial compression, with all samples falling within a broader interval of 0.25 to 0.40. These values reflect meaningful variations in internal degradation influenced by loading mode and specimen geometry. Overall, the findings advance the fundamental understanding of hot dry rock fracture mechanics and provide quantitative parameters that can enhance geomechanical modeling, improve stimulation design, and contribute to more effective and reliable geothermal reservoir development.
Document Type: Original article
Cited as: Nath, F., Garcilazo Jr., R., Cabezudo, E. R. Optical characterization of full-field deformation and damage evolution in hot dry rock under mechanical loading. Advances in Geo-Energy Research, 2026, 19(2): 118-130. https://doi.org/10.46690/ager.2026.02.02
DOI:
https://doi.org/10.46690/ager.2026.02.02Keywords:
Enhanced geothermal systems, three-dimensional digital image, correlation, damage variables, uniaxial compression test, diametrical compression testReferences
Aliabadian, Z., Zhao, G. F., Russell, A. R. Failure, crack initiation and the tensile strength of transversely isotropic rock using the Brazilian test. International Journal of Rock Mechanics and Mining Sciences, 2019, 122: 104073.
Amitrano, D. Rupture by damage accumulation in rocks. International Journal of Fracture, 2006, 139: 369-380.
Advancing Standards transforming Markets. Standard test method for splitting tensile strength of intact rock core specimens. ASTM D3967-08, 2008.
Advancing Standards transforming Markets. Standard test method for unconfined compressive strength of intact rock core specimens. ASTM D2938-95, 2017.
Chai, J., Liu, Y., Yang, B., et al. Application of digital image correlation technique for the damage characteristic of rock-like specimens under uniaxial compression. Advances in Civil Engineering, 2020, 2020: 8857495.
Cui, Z., Han, W. In situ SEM observations of damage and crack growth of shale. Microscopy and Microanalysis, 2018, 24: 107-115.
Diamandis, P. H., Rose-Washington, C. Globally abundant cheap renewable energy, 2023.
Fleckenstein, W. W., Miskimins, J. L., Eustes, A. W., et al. Development of multi-stage fracturing system and wellbore tractor to enable zonal isolation during stimulation and EGS operations in horizontal wellbores. Paper SPE 210210 Presented at SPE Annual Technical Conference and Exhibition, Houston, Texas, 3-5 October, 2022.
Horne, R., Genter, A., McClure, M., et al. Enhanced geothermal systems for clean firm energy generation. Nature Reviews Clean Technology, 2025, 1: 148-160.
Huenges, E. Enhanced geothermal systems: Review and status of research and development. Geothermal Power Generation, 2025: 451-473.
Jones, C., Moore, J., Simmons, S. Utah FORGE: Well 16A(78)-32 core analysis results. Geothermal Data Repository, 2023.
Lawrence Livermore National Laboratory (LLNL). Utah FORGE: Powder X-ray diffraction data from well 16A(78)-32. LLNL, 2023.
Luo, Y., Xie, H., Ren, L., et al. Linear elastic fracture mechanics characterization of an anisotropic shale. Scientific Reports, 2018, 8: 8505.
Ma, T., Peng, N., Zhu, Z. Brazilian tensile strength of anisotropic rocks: Review and new insights. Energies, 2018, 11: 304.
Munoz, H., Taheri, A., et al. Pre-peak and post-peak rock strain characteristics during uniaxial compression by 3D digital image correlation. Rock Mechanics and Rock Engineering, 2016, 49(7): 2541-2554.
Na, S., Sun, W., Ingraham, M., et al. Effects of spatial heterogeneity and material anisotropy on fracture pattern and effective toughness of Mancos shale in Brazilian tests. Journal of Geophysical Research: Solid Earth, 2017, 122: 6202-6230.
Nadimi, S., Forbes, B., Moore, J., et al. Hydrogeothermal modeling of a granitic-based discrete fracture network for Utah FORGE. Geothermics, 2020, 87: 101853.
Nath, F., Cabezudo, E. Unraveling damage variables in hot dry rocks: An optical investigation of geothermal rocks from Utah FORGE. Paper SPE 221069 Presented at SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 23-25 September, 2024.
Nath, F., Aguirre, G., Vazquez, E. C., et al. Deformation, damage, and fracture in hot dry rock under uniaxial and diametrical compression using 3D-DIC. Paper SPE 215048 Presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 16-18 October, 2023.
Nath, F., Mokhtari, M. Optical visualization of strain development and fracture propagation in laminated rocks. Journal of Petroleum Science and Engineering, 2018, 167: 354-365.
Ni, X., Zhu, Z., Zhao, J., et al. Meso-damage mechanical digitalization test of complete rock failure process. Rock and Soil Mechanics, 2009, 30: 3283-3290. (in Chinese)
Pan, B., Asundi, A., Xie, H., et al. Digital image correlation using iterative and pointwise least squares. Optics and Lasers in Engineering, 2009, 47: 865-874.
Rue, P. DIC: A revolution in experimental mechanics. Experimental Techniques, 2015, 39(6): 1-2.
Sharafisafa, M., Aliabadian, Z., Shen, L. Crack initiation and failure of block-in-matrix rocks under Brazilian test using digital image correlation. Theoretical and Applied Fracture Mechanics, 2020, 109: 102743.
Simmons, S. F., Kirby, S., Bartley, J., et al. Update on the geoscientific understanding of the Utah FORGE site. Paper SGP-TR-214 Presented at the 4th Workshop on Geothermal Reservoir Engineering, Stanford, California, 11-13 February, 2019.
Stirling, R. A., Simpson, D. J., Davie, C. T. Digital image correlation applied to Brazilian testing of sandstone. International Journal of Rock Mechanics and Mining Sciences, 2013, 60: 1-11.
Sutton, M. A., Orteu, J. J., Schreier, H. W. Image Correlation for Shape, Motion, and Deformation Measurements. Springer, New York, USA, 2009.
Trilion. Digital image correlation. 2025.
Utah FORGE. Project data dashboard – Well data. Utah FORGE, 2025.
Xia, Y., Plummer, M., Mattson, E., et al. Design, modeling and evaluation of a doublet heat extraction model in EGS. Renewable Energy, 2017, 105: 232-247.
Xie, L., Min, K. B. Initiation and propagation of fracture shearing during hydraulic stimulation in EGS. Geothermics, 2016, 59: 107-120.
Xing, P., McLennan, J., Moore, J. In-situ stress measurements at the Utah FORGE site. Energies, 2020, 13(21): 5842.
Xu, M., Qi, X., Geng, D. Application of improved image repair algorithm in rock damage research. Scientific Reports, 2024, 14: 14849.
Zhang, H., Huang, G., Song, H., et al. Deformation and failure mechanisms under indentation using DIC. Engineering Fracture Mechanics, 2012, 96: 667-675.
Zhou, X. P., Wang, Y. T., et al. Fracturing behavior study of three-flawed specimens by uniaxial compression and 3D digital image correlation: Sensitivity to brittleness. Rock Mechanics and Rock Engineering, 2019, 52(3): 691-718.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Fatick Nath, Rene Garcilazo Jr., Eleazar Cabezudo
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.